Industrial
Training for Instrumentation and Process Control
►Wiring ►Motor Control ►Instrumentation ► VFD
►Automation ►Microcontroller &
Robotics ►Soft Skills
Wiring – 4 Classes (12 Hours)
|
8.
Limit Switch.
|
1. Draw the layout on the
wall and set channel and cable.
|
9.
Solenoid valve.
|
2. Set switches, sockets, fan
regulator, fuse, CB, MCB, MCCB.
|
10.
Phase Failure Relay.
|
3. Fix holder, ceiling rose,
S.B and board on the wall.
|
11.
Pneumatic Valve.
|
4. Perform circuit operation
of one lamp control for one point & two lamp control for two points.
|
12.
Thermal over Load Relay.
|
5. Circuit operation of one
lamp control for two points.
|
13.
VFD
|
6. Perform tube light.
|
14.
Cable Connector
|
7. Calling bell control
circuit operation from two points.
|
15.
Cable Lug’s
|
8. Connect ceiling fan.
|
16.
Pressure Switch
|
9. Test the polarity,
continuity of wiring.
|
VFD –2 Classes (6
hours)
|
10. Measure the insulation
resistance.
|
1.
Explain the working principles of VFD
|
Motor Control – 10 Classes (30 Hours)
|
2.
Wiring of VFD
|
1. Identify NO and NC, coil terminal, auxiliary contact.
|
3.
Fault finding of VFD
|
2. Perform timer operation.
|
4.
Connect With Load
|
3. Perform direct on line (DOL) connection.
|
Automation – 10
Classes (30 hours)
|
4. Perform star delta starter.
|
1. Introduce to PLC.
|
5. Perform R/F starter by using timer and cam starter.
|
2. Introduce To PLC
Parameter.
|
6. Perform Automatic transfer switch (ATS) connection.
|
3. Program on PLC Software.
|
7. Install of DB, SDB, FDB and MDB.
|
4. Introduce to VFD.
|
8.
Make fault in an industrial panel board and solve it.
|
5. Introduce to Sensor.
|
9. Introduce phase
missing relay and connect with load
|
6. Wiring & connect
sensor with other accessories on PLC
|
10. Carryout electrical connections of change over
switch
|
7. Exercise (Minimum 15) program.
|
11. Calculation (MC,
TOR, Cable, Current)
|
8. Interfacing VFD & Sensor to PLC.
|
12.Define cam switch
|
4. Introduce to HMI.
|
13. Describe the
functions of change over switch
|
Microcontroller
& robotics - 4 Classes (12 Hours)
|
14. Control a fluid
line by using solenoid valve
|
1. Introduce
to Microcontroller
|
15.Connect ammeter,
voltmeter by using selector (rotary) switch
|
2. PIC Based (Minimum 5)
projects.
|
16.Connect a 3-phase motor by using limit switch
with DOL starter
|
3. Arduino Based (Minimum
5) projects.
|
17.Connect water pump and control by using water
level switch
|
4. Software Based Programming.
|
18.Perform Phase Failure
Relay using relay
|
5. Programming based circuit design.
|
19. Control motor
using frequency inverter
|
Soft
Skills – 1 Class (3 Hours)
|
20. Measure temperature using
Temperature Controller.
|
1. Create CV.
|
21. Connection SSR.
|
2. Face Interview Board.
|
22. Auto
forward-reverse starter and connect with load.
|
3. Communicate to Colleague, Boss and Subordinate.
|
23.Test the performance of this system
|
If necessary include
short course
|
Instrumentation
– 5 Classes (15 Hours)
|
1.
|
1.
Temperature Controller.
|
2.
|
2.
Fuse, CB, MCB, and MCCB.
|
3.
|
3.
Timer.
|
4.
|
4.
Relay.
|
5.
|
5.
Magnetic Contactor.
|
6.
|
6.
Proximity Sensor.
|
|
7.
RTC, TC.
|